git/RTLSDR-AirbandRTL
1
0
Fork 0
mirror of https://github.com/charlie-foxtrot/RTLSDR-Airband.git synced 2026-03-03 05:30:28 +01:00
Code Issues Packages Projects Releases Wiki Activity
Page: CTCSS
Pages
Audio filters in MP3 outputs CTCSS Changing PID file location Channel usage statistics Configuration essentials Configuring Icecast outputs Configuring MiriSDR devices Configuring PulseAudio outputs Configuring PulseAudio server Configuring RTLSDR devices Configuring SoapySDR devices Configuring UDP outputs Configuring channels for multichannel mode Configuring channels for scan mode Configuring file outputs Configuring mixers Configuring optional features Configuring rawfile outputs Disabling configuration sections General configuration file structure Grammar basics Home Icecast metadata updates in scan mode Installation Limiting channel bandwidth Logging activity of scanned frequencies Manual squelch setting Multithreaded operation NFM deemphasis Notch filter Running Setting up your own Icecast server Troubleshooting Tweaking sampling rate and FFT size
1 CTCSS
charlie-foxtrot edited this page 2023-04-23 17:15:03 -07:00

Continuous Tone-Coded Squelch System (CTCSS) support will only open squelch (pass audio) when the configured tone is present - see Wikipedia.

NOTE: Enabling ctcss does not filter the tone from the output audio, for that enable a notch at the same frequency - see Notch filter.

To enable CTCSS, set the ctcss channel option to the tone frequency:

devices: ({
  (...)
  channels: (
    {
      freq = 145.35;
      modulation = "nfm";
      ctcss = 103.5;
    }
  )
});

In scan mode ctcss can be provided as either a single value that will apply to all frequencies or a list of values. When providing a list of values, use 0.0 for any frequency where ctcss should not be enabled:

devices: ({
  mode = "scan";
  (...)
  channels: (
    {
      freqs = ( 145.35, 145.65, 145.85 );
      ctcss = ( 0.0, 103.5, 0.0);
#     ctcss = 103.5;
    }
  )
});